You can fix scratches on your auto glass yourself by following these steps. Ensure that there is no debris in the work area as this will hinder bonding of the glass. Mark the damaged area on the undamaged side of the glass with a dry-erase marker. Then, prepare your repair product. Continue to step 7 until the scratch has been removed completely. The repair process will be much easier if you’ve marked the area properly.
1. Cerium oxide
For a quick solution to minor scratches, mix a little bit of cerium oxide with water. The paste can then be applied to the scratch using a rotary tool or by hand. You can also use a small amount of water to create a thick paste. Once it has cured, wipe the scratch off with a wet sponge to remove any excess compound. Cerium oxide is an excellent scratch-remover, but you should be careful, as it will irritate the skin.
Before beginning the repair, mark the scratch with a piece of tape or dry-erase. Then, mix a little bit of cerium oxide with water to make a slurry. This mixture will be slightly harder than the original scratch, so it will take a little longer. You may need to repeat these steps as needed to achieve the desired result. Once you have achieved this, you may polish the glass.
2. Nail polish
If you have scratches on your auto glass, you don’t have to throw it away just yet. Using clear nail polish can make your scratch look like new again. It contains potent ingredients that can fill in the scratches and dissipate visible dings. Apply the polish to the scratch with a nail polish applicator brush and allow it to cure for an hour. Then wipe off the polish using a clean cloth dampened with nail polish remover.
First, you need to clean and polish the scratched auto glass. To do this, you will need rubbing compound, which contains cerium oxide, which bonds scratches together. Clear acrylic nail polish is widely available in shops, and you can also use it for minor repairs. But, remember that this method is only suitable for shallow scratches because it will remove the top layer of paint. You should avoid applying the paste directly to the scratched glass, as this will cause additional damage.
If you want to make a scratch disappear, try using toothpaste. However, make sure that it isn’t gel toothpaste – it won’t work! The best type of toothpaste to use for this purpose is white, baking soda toothpaste. Apply toothpaste to the scratch with a lint-free cloth, then gently rub it in using circular motions for about 30 seconds. You can also use a damp cloth to wipe away the toothpaste.
Next, use white non-gel toothpaste. Apply toothpaste to the scratch with a damp lint-free cloth. Rub it into the scratch in a circular motion for at least a minute. Repeat until you have achieved the desired result. Make sure to wipe off any excess toothpaste before reapplying. If the scratch remains, repeat the procedure. Once you are satisfied with the results, you can also clean off any leftover toothpaste.
4. Buffing machine
Before you start buffing your auto glass, make sure the area is free of debris. Leaving dust on the surface may interfere with the bonding of the repair product. To make the repair process easier, mark the scratched area with a dry-erase marker. Alternatively, you can use a piece of tape to indicate the area. Depending on what you choose to use for the repair, you may want to prepare the area first before applying the product.
The first step in using a buffing machine to fix scratches in auto glass is to clean the area with an alcohol-based cleaner. You may use a cleaning solution to spray on the area, and then wipe off the residue. You may also want to use a scratch remover that contains cerium oxide. The cerium oxide helps the compound bond with the glass. This substance is commonly used in the manufacture of jewelry and ceramics. After you have cleaned the glass, apply the scratch remover.
Windshield Replacement Experts in Your Area
If you need extra tips on how to care for a cracked or replace your cracked window, you can contact Low Price Auto Glass, we are your local windshield repair expert. Our experienced technicians are ready to help you with your window inquiries. Call (760) 489 6700 or use our online quote request form.